Corrotech / Products / Blasting technology / Abrasive blasting / Pressure blasting equipment / AIRBLAST® AQUASTORM 200 blasting system

AIRBLAST® AQUASTORM 200 blasting system

Product Number
CTTNAQB200P
CTTNAQB200EP
The AIRBLAST® AQUASTORM 200 blasting system is used in industrial maintenance applications such as cleaning or removing layers of concrete, removing coatings layer by layer, completely removing paint to a specified degree of cleanliness, or removing corroded layers of steel. The device is available in pneumatic and electro-pneumatic versions. Additional configurations or accessories are available upon request. Detail description
Variants
200l 200l

The AIRBLAST® AQUASTORM 200 blasting system is used in industrial maintenance applications such as cleaning or removing layers of concrete, removing coatings layer by layer, completely removing paint to a specified degree of cleanliness, or removing corroded layers of steel. The system is also very effective in applications such as. in the petrochemical industry where sparking or static electricity generation during blasting is undesirable. By coating each abrasive particle with water, the system effectively eliminates this problem. The AIRBLAST® AQUASTORM 200 system also enables blasting at very low pressure, allowing the operator to switch from conventional blasting to gentle surface cleaning. The device is available in pneumatic and electro-pneumatic versions. Additional configurations or accessories are available upon request.

Advantages:

  • Allows blasting at both very low and high pressures
  • The consumption of abrasives is reduced by up to 60%, it also has a lower water consumption
  • Minimal or no restrictions for the application
  • Long service life of all components subject to wear
  • No dry abrasive is required for application, saving storage costs
  • The use of recycled abrasives is possible
  • Can be jetted up to 250 m
  • Possibility of using a rust inhibitor

For more information about AIRBLAST® products, please visit www.airblast.com.

Manufacturer: Airblast
Dimensions (w x d x h): 890 x 910 x 1 380 mm
Abrasive capacity: 200 l
Weight: 185 kg
Blasting hose connection: 32 mm
Air connection: 38 mm
Required inlet air pressure: 4 - 8 bar
Operating pressure: 2 - 10 bar
Electrical connection: 12 V / 1.2 W
Abrasive consumption incl. 25% water 1 - 8 l/min.
Contents of delivery: blasting device, ATSDX 6/50 nozzle (9.5 mm), 20 m blasting hose 32 x 8 mm, remote valve control, dead man's coupling

Product number Variant
CTTNAQB200P AIRBLAST® AQUASTORM 200 blasting system - 200l
CTTNAQB200EP AIRBLAST® AQUASTORM 200 blasting system - 200l

CORROTECH NEWS

Every month we send news from the world of surface treatments to your email inboxes. Subscribe to make sure you don't miss a thing.