Corrotech / Products / Coatings / Industrial coatings / CORROCOAT Plasmet ZF

CORROCOAT Plasmet ZF

Product Number

CTPZFCOR1

CTPZFCOR5

CTPZFCOR10

Surface tolerant, two-component epoxy coating with corrosion inhibitor and passivator filled with ferrous mica and special glass microflakes for increased protection. Plasmet ZF is formulated to provide good corrosion protection on corroded metals with minimal surface treatment, it can also be applied to high pressure water blasted and abrasive blasted surfaces as an inhibition protection or primer. Detail description

Hue

šedá tmavě šedá červená (red oxide) zelená černá eau de nil modrá

CONSUMPTION CALCULATOR

applied area

m²

layer thickness (DFT)

μm

application losses

practical consumption

liters

Variants

1l 5l 10l

Recommended

Detailed description

Plasmet ZF is formulated to provide good corrosion protection on corroded metals with minimal surface treatment, it can also be applied to high pressure water blasted and abrasive blasted surfaces as an inhibition protection or primer. Plasmet ZF can be used completely on its own, in one or more layers, or can be overcoated with other Plasmet materials to make the surface smoother, cleaner and more chemically resistant. Plasmet ZF is tough, durable and resistant to automotive traffic. It can be used for protection in atmospheric conditions as well as in immersion. In atmospheric conditions, ZF can be used under decorative materials such as polyurethanes or enamels. Available shades: dark grey, green, red (red oxide).

CORROCOAT is a world-leading brand in corrosion protection technology with its own research and development of materials. The company was founded in 1975 in the United Kingdom and operates on six continents through a network of more than 35 licensed partners. In many countries around the world, CORROCOAT materials are specified as the industry standard. CORROCOAT uses innovative mechanical engineering combined with corrosion protection technology to ensure long-term protection for both new and damaged equipment. Thanks to a focus on quality, the developed processes are a proven, cost-effective solution that enables long-term success in the fight against corrosion. Learn more about the product at www.corrocoat.cz.

Technical data

Manufacturer: Corrocoat

Temperature limit for diving: 60°C; 95°C when repainted with a suitable coating

Temperature limit outside the dive: 130°C

Recommended dry film thickness: 150 microns in mild corrosive environments; two layers of 150 microns in aggressive atmospheric conditions or immersion

Dry matter content: 57,5%

Activator type: polyamide

Mixing ratio: base : activator 3 : 1 (weight ratio), base : activator 7 : 1 (volume ratio)

Available shades: dark grey, green, red (red oxide)

Downloads

05-15-PLASMET-ZF-UL-rev-listopad-2019-stav-k-02_2025.pdf Download

CORROCOAT-KONCEPCE-STROJNIHO-INZENIRSTVI.pdf Download