Corrotech / Products / Coatings / Special coatings / CORROCOAT Plasmet EP1

CORROCOAT Plasmet EP1

Product Number

CTPEPCOR1

CTPEPCOR5

High-drying, two-component, amine-cured epoxy compound filled with stainless steel and special glass microflakes together with silicon carbide. CORROCOAT Plasmet EP1 is formulated for use in abrasive, chemically aggressive environments such as pump bodies, impellers, pipe bends, agitators and diffuser drums. Detail description

Hue

světle šedá černá

CONSUMPTION CALCULATOR

applied area

m²

layer thickness (DFT)

μm

application losses

practical consumption

liters

Variants

1l 5l

Detailed description

CORROCOAT Plasmet EP1 is formulated for use in abrasive, chemically aggressive environments, such as pump casings, impellers, pipe bends, agitators, and diffuser drums. Plasmet EP1 is suitable for abrasive submerged environments. It must not be applied in single-coat thicknesses exceeding 850 microns. Where greater thickness is required, Plasmet HTE or another suitable material must be applied first. Plasmet EP1 is difficult to machine after full curing; grinding is preferred. Available shades: light gray.

CORROCOAT is a world-leading brand in corrosion protection technology with its own research and development of materials. The company was founded in 1975 in the United Kingdom and operates on six continents through a network of more than 35 licensed partners. In many countries around the world, CORROCOAT materials are specified as the industry standard. CORROCOAT uses innovative mechanical engineering combined with corrosion protection technology to ensure long-term protection for both new and damaged equipment. Thanks to a focus on quality, the developed processes are a proven, cost-effective solution that enables long-term success in the fight against corrosion. Learn more about the product at www.corrocoat.cz.

Technical data

Manufacturer: Corrocoat

Temperature limit for diving: 140°C

Temperature limit outside the dive: 170°C

Recommended dry film thickness: minimum 850 microns/coat, two coats or more are recommended, depending on environmental conditions

Dry matter content: 94%

Activator type: formulated polyamine

Mixing ratio: base : activator 3 : 2 (weight ratio)

Available shades: light gray

Downloads

05-92-PLASMET-EP1-UL.pdf Download

CORROCOAT-KONCEPCE-STROJNIHO-INZENIRSTVI.pdf Download