Corrotech / Products / Coatings / Special coatings / CORROCOAT Biofoul

CORROCOAT Biofoul

Product Number

CTBIOCOR5

CTBIOCOR10

Three-component, cold-cured polyester containing metallic (inorganic) copper flakes. Corrocoat Biofoul is considered non-toxic, has excellent long-term anti-fouling properties and can withstand flow velocities in excess of 25 m/s. Detail description

Hue

metallic appearance of copper

CONSUMPTION CALCULATOR

applied area

m²

layer thickness (DFT)

μm

application losses

practical consumption

liters

Variants

5l 10l

Detailed description

Corrocoat Biofoul has been specially formulated as a durable, long-lasting anti-fouling coating. It can be applied over an anti-corrosive coating or can be used in moulds for fibreglass structures to give the structures anti-fouling protection. It can also be applied directly to fiberglass that has had suitable surface preparation. It can also be used on architectural features to give the appearance of copper cladding and exhibits the appearance of a copper patina. Anti-fouling protection with copper metal has been used for many years on wooden ships in the form of copper sheets, and in low concentrations it is considered non-toxic to both marine and mammalian life forms. Available shades: metallic copper appearance only.

CORROCOAT is the world's leading brand in anti-corrosion technology with in-house research and development of materials. Founded in 1975 in the UK, the company operates on six continents around the world through a network of more than 35 licensed partners. In many countries around the world, materials are specified as an industry standard. CORROCOAT uses innovative mechanical engineering combined with anti-corrosion technology to provide long-term protection for both new and damaged equipment. With a focus on quality, the processes developed are a proven, cost-effective weapon to win the battle against corrosion in the long term. More about the product at www.corrocoat.cz.

Technical data

Manufacturer: Corrocoat

Specific gravity: 1,97 g/cm³ after mixing

Flash point: resin: 32°C, paste: 68°C

Recommended thickness of dry coating: 250 to 400 microns depending on application

Dry matter volume: 99%

Type of catalyst: methyl ethyl ketone peroxide special compound Corrocoat P2

Mixing ratio: resin: 24.5 parts, paste: 73.5 parts, catalyst: 2 parts

Available shades: metallic appearance of copper

Downloads

03-05-CORROCOAT-BIOFOUL-UL.pdf Download

CORROCOAT-KONCEPCE-STROJNIHO-INZENIRSTVI.pdf Download